Match the Command with the Device Mode at Which the Command Is Entered. (Not All Options Are Used.)

In Cisco certifications like CCNA, one of the foundational topics you must master is how to match the command with the device mode at which the command is entered. (not all options are used.). It’s more than just an exam question—understanding Cisco command modes is key to configuring, maintaining, and troubleshooting networking devices in the real world.

At DumpsQueen Official, we’ve crafted this comprehensive guide to walk you through everything you need to know to ace this topic in your Cisco exam. You’ll learn the essential command modes, see examples of real commands, and get sample multiple-choice questions to reinforce your learning.

Why Device Modes Matter in Cisco CLI

When working with Cisco routers and switches, commands must be entered in specific modes. Each mode gives access to different sets of commands and configuration abilities. If you're not in the right mode, even a correct command will return an error. That’s why being able to match a command to its corresponding mode is not only important for your exam but also crucial for real-world job performance.

Overview of Cisco Command Modes

Let’s break down the primary Cisco command modes and understand what each one does.

1. User EXEC Mode

Prompt: Router>
Access Level: Basic
Purpose: View limited information; perform basic monitoring
Example Commands: ping, traceroute, show version

This is the first mode you enter when you access a Cisco device. It's read-only and is mainly used for basic troubleshooting.

2. Privileged EXEC Mode

Prompt: Router#
Access Level: Elevated
Purpose: Full access to monitoring commands; allows switching to configuration modes
How to Access: Type enable in User EXEC mode
Example Commands: show running-config, reload, copy

This mode gives you a deeper look into the device’s status and allows configuration entry.

3. Global Configuration Mode

Prompt: Router(config)#
Access Level: Administrative
Purpose: Modify the overall configuration of the device
How to Access: From Privileged EXEC Mode, type configure terminal
Example Commands: hostname, no ip domain-lookup, banner motd

All major configuration changes are made here.

4. Interface Configuration Mode

Prompt: Router(config-if)#
Access Level: Specific Configuration
Purpose: Configure individual interfaces
How to Access: From Global Configuration Mode, type interface FastEthernet0/1 or similar
Example Commands: ip address, duplex, no shutdown

You’ll use this mode to assign IP addresses and enable interfaces.

5. Line Configuration Mode

Prompt: Router(config-line)#
Access Level: Terminal Access Configuration
Purpose: Configure access lines (console or virtual terminal)
How to Access: From Global Configuration Mode, type line vty 0 4 or line console 0
Example Commands: password, login, exec-timeout

This mode controls user access to the device via terminal sessions like Telnet or console.

6. ROM Monitor (ROMMON) Mode

Prompt: rommon>
Access Level: Maintenance
Purpose: Used when a device can’t boot normally
Access Method: Manual intervention during boot (Ctrl+Break)

ROMMON is used rarely, usually in recovery situations such as corrupted images or forgotten passwords.

How to Match the Command with the Device Mode at Which the Command Is Entered. (Not All Options Are Used.)

Here’s a simple reference table to help you understand which command goes in which mode:

Command: enable
Device Mode: User EXEC Mode

Command: show running-config
Device Mode: Privileged EXEC Mode

Command: hostname Router1
Device Mode: Global Configuration Mode

Command: interface GigabitEthernet0/0
Device Mode: Global Configuration Mode

Command: ip address 192.168.1.1 255.255.255.0
Device Mode: Interface Configuration Mode

Command: line console 0
Device Mode: Global Configuration Mode

Command: password cisco
Device Mode: Line Configuration Mode

Why This Topic Is So Heavily Tested

Cisco expects network engineers to be confident using the CLI to configure and troubleshoot devices. Questions that ask you to match the command with the device mode at which the command is entered. (not all options are used.) help validate that you know the purpose and scope of each command mode.

It’s not enough to just memorize commands—you must know where and when to use them. That’s why this skill is foundational to certifications like:

Cisco Certified Network Associate (CCNA)
Cisco Certified Specialist - Enterprise Core
Cisco Certified Network Professional (CCNP)

Tips to Master Command Modes for Your Exam

Practice in Cisco Packet Tracer or GNS3 regularly
Memorize prompts for each command mode (>, #, (config)#, etc.)
Understand command hierarchy: You move down the CLI structure as you go from User EXEC to Interface Configuration Mode
Always use the question mark (?) in CLI to check for available commands
Use DumpsQueen’s verified dumps that include these kinds of drag-and-drop and MCQ questions

How DumpsQueen Helps You Prepare

At DumpsQueen Official, we understand how critical it is to prepare with accurate and up-to-date resources. That’s why our practice exams and dumps include:

Verified Cisco exam questions
Drag-and-drop matching style questions
Real command-line scenarios
Detailed explanations for every answer
Simulation-based practice

With our resources, you’ll have plenty of practice to become fluent in identifying which command belongs in which device mode.

Real-World Use Case of Cisco Command Modes

Imagine you’re configuring a new router in a production environment. You start in User EXEC Mode to verify connectivity with ping. Then you use enable to enter Privileged EXEC Mode and back up the current configuration. After that, you go into Global Configuration Mode with configure terminal to assign a hostname. Next, you enter Interface Configuration Mode to configure IP addresses, and finally Line Configuration Mode to secure remote access.

Knowing which command belongs where allows you to configure your device smoothly and avoid costly mistakes. This skill, tested in your Cisco exam, directly translates to your success on the job.

Final Thoughts

Being able to confidently match the command with the device mode at which the command is entered. (not all options are used.) is essential for any aspiring network professional. From acing your Cisco exams to performing hands-on configurations in the field, command mode mastery is non-negotiable.

Use this guide from DumpsQueen Official as your go-to resource. Reinforce your knowledge with our verified practice dumps, take the quizzes, and don’t just memorize—understand. Because when it comes to Cisco CLI, precision is everything.

Sample MCQs for Practice

Use these practice questions to test your understanding of how to match commands with the correct device modes.

Question 1
Match the command with the device mode at which the command is entered. (not all options are used.)

enable
hostname RouterA
show version
interface GigabitEthernet0/1
password Cisco123

Options:
A. User EXEC Mode
B. Privileged EXEC Mode
C. Global Configuration Mode
D. Interface Configuration Mode
E. Line Configuration Mode

Correct Answers:
1 - A
2 - C
3 - B
4 - C
5 - E

Question 2
Which of the following commands is used in Interface Configuration Mode?

A. ping 8.8.8.8
B. ip address 10.0.0.1 255.255.255.0
C. show ip interface brief
D. line vty 0 4

Correct Answer: B

Question 3
What prompt indicates that you are in Global Configuration Mode?

A. Router>
B. Router#
C. Router(config)#
D. Router(config-if)#

Correct Answer: C

Question 4
To configure Telnet access on a Cisco router, which mode must you enter?

A. Interface Configuration Mode
B. Privileged EXEC Mode
C. Line Configuration Mode
D. ROMMON Mode